Resource centre

PAC guides and technical resources

Everything we get asked about polyaluminium chloride — grade selection, dose calculation, specifications, pricing logic and export routes. Written for the people who actually run the plant and sign the purchase order.

Grades, packaging and pricing

Buying PAC

Polyaluminium chloride supplier in the UAE

Al Burj Chemicals supplies polyaluminium chloride (PAC) to municipal water plants, sewage treatment plants, district cooling operators and industrial users across the…

Water treatment chemicals supplier in the UAE

We are a focused supplier, not a catalogue. Coagulation is what we do — polyaluminium chloride, supplied properly, with the technical support to get your dose…

Liquid PAC supplier in the UAE

Liquid polyaluminium chloride at 10–12% Al2O3, supplied in IBC, drums or bulk tanker — ready to dose, with no make-up tank, no mixing, and no undissolved residue in your…

PAC powder in 25 kg bags

Spray-dried polyaluminium chloride at 28–30% Al2O3 — the standard format for export, for high-consumption plants, and for anywhere freight cost…

Aluminium chlorohydrate (ACH) supplier in the UAE

ACH is the high-basicity end of the polyaluminium chloride family — typically 83% basicity, minimal pH depression, and near-zero alkalinity…

PAC price per ton in the UAE

Nobody can quote a real PAC price without knowing your grade, volume, packaging and destination. What we can do is explain exactly what drives the number — so the quote…

Dosing, selection and specifications

Technical guides

PAC dosage calculation and jar testing

Getting the dose right is worth more than getting the price right. A plant over-dosing by 20% wastes more each year than most buyers ever negotiate off the…

PAC basicity explained

Basicity is the single most misunderstood number on a PAC specification — and the one most likely to explain why a product that worked for someone else does not work for…

PAC specifications, SDS and Certificate of Analysis

The paperwork side of buying PAC — what a Certificate of Analysis should contain, what the Safety Data Sheet covers, and the shipping classification your freight…

PAC storage, handling and safety

PAC is corrosive and reacts with alkalis. None of this is difficult to manage, but getting the tank material or the storage segregation wrong is expensive and…

PAC vs alum: an honest comparison

Alum is cheaper per tonne. PAC is usually cheaper per cubic metre treated. Here is where each one genuinely wins, including the cases where alum is still the right…

PAC vs ferric chloride

Ferric is often cheaper and genuinely effective on some streams — particularly phosphorus removal and sulphide control. It is also aggressive on equipment and stains…

What PAC does in each type of plant

By application

PAC for drinking water treatment

Polyaluminium chloride is the coagulant of choice for potable water clarification across the region — wider effective pH range, lower alkalinity consumption, and lower…

PAC for sewage and wastewater treatment

Used in STPs and industrial effluent plants across the UAE for suspended solids removal, COD reduction, phosphorus precipitation and improving sludge…

PAC for desalination pre-treatment

Coagulation ahead of ultrafiltration and reverse osmosis is what keeps membranes alive. PAC reduces SDI, drops organic load and cuts the cleaning frequency that…

PAC for district cooling water treatment

District cooling plants across Dubai, Abu Dhabi and Doha use PAC on make-up and side-stream streams to hold turbidity down and keep fouling off heat transfer…

PAC for sludge dewatering and conditioning

Sludge disposal is one of the largest recurring costs in any treatment plant. Better conditioning means drier cake, fewer tanker movements and a smaller disposal invoice…

PAC for textile and paper mill effluent

Dyeing and paper effluent are among the hardest streams to treat — high colour, high COD, variable pH. PAC is the workhorse coagulant for both, and dose economics matter…

PAC for swimming pool water treatment

Pool operators and FM contractors across the UAE use PAC as a clarifier — it catches the sub-micron particles that make water look milky and that a sand filter alone…

Delivery across the emirates

UAE supply

PAC supplier in Dubai

We are based in Dubai, we ship through Jebel Ali, and we deliver polyaluminium chloride to sites across the emirate — usually within the same working week you…

PAC supplier to Abu Dhabi

We deliver polyaluminium chloride from Dubai stock into Abu Dhabi, Mussafah, ICAD, Al Ain and the Western Region — typically within two working days of order…

PAC supplier to Sharjah and the Northern Emirates

Sharjah, Ajman, Ras Al Khaimah, Umm Al Quwain and Fujairah — usually next working day from Dubai stock, which makes us the practical choice when a plant is running…

Routes, transit times and documentation